The Basic Guide How To Automatically Replace Mouse Drivers for Windows 8.1 on Asus laptop from Scratch

On most full-size PCs, you just need to remove a side panel so you can get to the card slots—usually on the left side of the PC if you’re facing its front. On some PCs, you’ll need to remove the whole case. And some manufacturers make this harder than others. When in doubt, check your manual or just search the web for how to take the case off your computer model.

When the card is removed, be sure to place it on a surface that isn’t electrically conductive. Once the clip is relaxed, carefully lift the card out of the PCIExpress slot.

Exploring Painless Device Manager Advice

The first thing to take into account is your budget, and then you can narrow down from there. Also some very small PC cases might limit the height of the card you can use. Locate the right cables you need for the job — it may be one or two 6-pin or 8-pin PCIExpress power connectors. Double check you have the right ones as using the wrong power cable can damage your components.

You may need to push it a little with your finger to make sure it’s physically locked into the receiver slot on the card. Gently slide your card into place on the PCI-E slot. As it’s going in, be sure to align the metal piece that connects with the case with the tab that accepts it. You’re now ready to plug in the new card, which is basically the same process in reverse. Push down on this plastic tab to release the card from the PCI-E slot.Now, you’re ready to pull the card out.

  • After the updates have been installed, check if there are additional Windows Updates available.
  • Go to the official graphics card manufacturer’s website Drivers section.
  • Although digging into the guts of your machine can be a bit intimidating, as long as you do your homework, the process is really quite painless.
  • Having a decent graphics card is a big deal on a Windows 7 computer.
  • If you’re upgrading an older desktop PC to Windows 7, you might want to take the time to upgrade the graphics card, too.
  • Plug the graphics card into the appropriate slot, close your computer, and replace any screws.

After you finally get your new card, it’s time to plug that sucker in. And after the headache of sorting through reviews, choosing a new card, and parting with your money, this part is easy. You’ll need a cool, dry place to work with plenty of table or desk space, a Phillips-head www.rocketdrivers.com/devices/firewire screwdriver, and optionally an anti-static bracelet to protect your PC’s internal components. Almost all card manufacturers and retailers have surprisingly generous return policies. If you accidentally order the wrong card, you can usually return it within 14 days, so long as you keep your receipt .

No-Fuss Plans Of Updating Drivers – Some Insights

Gently grasp the card with your hand and pull up, starting with the side closest to the back of the case. If it doesn’t, you probably didn’t get that plastic tab pushed all the way. If you have trouble, just be patient and make sure not to force anything. You can also check YouTube for videos of people demonstrating this on different types of rigs. Now, it’s time to remove the cover from the case.

Of course, this doesn’t apply if you buy your card from secondary markets like eBay or Craigslist. Once you’ve figured out what your PC can handle, it’s time to choose your new card.

Right-click a blank space in the right panel and select Paste. Locate the folder with the driver you want to copy. Each driver is located within its own folder.To access this folder, click your C drive in the left panel, double-click Windows, then System32, then DriverStore, and then FileRepository. The above article may contain affiliate links, which help support How-To Geek. When it’s in and perpendicular to the motherboard, push down gently until you hear the plastic tab at the end of the PCI-E slot “pop” into place.